Panasonic LED Lighting

View PDF brochure

CIRCUIT PROTECTION

ZNR SURGE ABSORBERS
Will protect LED lighting equipment from electric surges that come through AC power lines. Panasonic has a wide selection of Surface Mount & Disc part numbers.

Surface Mount

  • Crack Resistant (Molded Structure)
  • Flow/Refl ow Soldering

Disc

  • Diameters From 5mm to 20mm
  • High Surge Withstand Capability & Small Size
  • 81V and Higher, With Agency Recognitions

MULTI-LAYER CHIP VARISTORS
Will protect LED’s from ESD damage. White and Blue LED’s are most susceptible to ESD
damage. MLCVs are available in a wide variety of values.

  • ESD suppression
  • Accommodate Series LED Combinations
  • Can Replace (2) Zener Diodes and (1) Capacitor

THERMAL MANAGEMENT

MULTI-LAYER CHIP THERMISTORS
Can aid in the control of LED circuits. Elevated junction temperatures can reduce expected life, resulting in the need for temperature control. This begins with temperature sensing.
  • Brightness Control
  • Overheating Prevention

PYROLYTIC GRAPHITE SHEET

PGS is a heat spreading material with several times the thermal conductivity of copper in its plane.

  • Spreads Heat From Hot Spots, Allowing More Effi cient Heat Sinking
  • Highly Flexible
  • Can Be Die Cut to Custom Shapes

I/O CONTROL

RF MODULES
RF Modules are an excellent choice for lighting control applications. Two series in Panasonic’s RF Module product line are well suited for lighting control:

  • Mesh Networking — Complex, multi-node networks are most easily implemented using SNAP® (Synapse Network Application Protocol) modules such as the PAN4555 and PAN4561. SNAP networks don’t require the use of a coordinator, making them more reliable than other network topologies.
  • ISM — With their tiny footprint, ISM modules are Panasonic’s most aggressively priced and smallest RF Modules. The PAN2355 series are versatile and ideal for proprietary networks.
ELECTROMECHANICAL

Panasonic offers tactile switches and linear potentiometers for lighting control applications,
that can be found in cars, offices, homes and flashlights.

  • Panasonic Long Stroke Switches Provide Less Finger Fatigue and Accident-Free Actuation.
  • Center Space Switches Allow For LED Integration
  • 20mm Slide Potentiometers Provide Smooth Dimming Control

Epson Toyocom

Epson Toyocom Corporation - Press Release

U.S.-BASED EPSON TOYOCOM TIMING PRODUCTS DIVISION EXPANDS AND ADVANCES HIGH-ACCURACY CRYSTAL OSCILLATOR LINE-UP

New SG-211S*E Series supports low voltage, high temperature applications

Epson ToyocomEl Segundo,CA -July 14, 2009 - Epson Toyocom Corporation's U.S.-based Timing Products Division today announced the "SG-211S*E" series of compact, highly accurate simple clock oscillators (SPXO). The new crystal oscillators, with increased capabilities, support voltages as low as 1.8 V and temperatures as high as 90°C. Sample pricing is estimated at approximately $7.00 each.

Epson Toyocom has long been offering a line of compact and highly accurate SPXO for use as reference clocks in wireless networks, Bluetooth, and other short range communication applications. Applications for even smaller wireless devices are on the rise, as are the temperatures of components contained in compact housings. The new SG series fills this need for high temperature support in addition to a strong industry demand for low voltages necessary to maximize battery run time.

Epson Toyocom has upgraded its already compact and highly accurate crystal oscillators with support for voltages as low as 1.8 V and a frequency tolerance of ±15 × 10-6 at temperatures up to 90°C. The SG-211S*E series also has 5 dB (detuning frequency: 1 kHz) lower phase noise(*1) than earlier products, making it an excellent choice for the low phase noise requirements of reference clocks in wireless communication devices.

Main Features
  1. High accuracy suited to wireless communication
    (frequency tolerance: ±15 × 10-6)
  2. Maintains accuracy at temperatures between -40°C and 90°C
  3. Support for voltages as low as 1.8 V
  4. Small size (2.5 mm × 2.0 mm)
  5. Achieves low phase noise
Main Specifications
SG-211 Chart

Glossary

(*1) Phase noise
Energy that is radiated near the oscillation frequency, and that occurs due to the internal and external environmental factors (noise) of a crystal oscillation circuit. Wireless signal transmission errors can occur when this noise value is too high.

Norcomp

Connect with the Latest in IP67 Technology

I P - 6 7 D-SUB CONNECTORS

Norcomp Connectors

Features:

  • Space Savings!
  • Competitive Cost
  • 100% IP67 Compliance Tested

Available Sizes:

  • 9 - 25 (Standard)
  • 15 - 44 (High Density)

For More Information Contact your Electro Mark Representative

Example Applications:

  • Hand held computers, scanners, and printers that are used outdoors
  • Remote sensors, gauges and data loggers that are used outdoors
  • Industrial and Medical equipment that is routinely subject to wash down
  • Transmitters and emergency beacons that are subject to temporary submersion
  • Gas, Electric and Water metering systems that have embedded Smart Grid electronics
  • Portable electric generation equipment (Gen Sets)
  • Consumer and Commercial boating electronics (Radios, Scanners, Radar, DC Power Ports)

NEW Product Line

Firecomms

Electro Mark now represents Firecomms - a leading supplier of high speed Plastic Optical Fiber (POF) transceivers and Surface Emitting Lasers (VCSELs):

FirecommsFirecomms, a semiconductor company, develops high-speed optical components that drive IPTV home networks and in-car multimedia entertainment systems. The company’s revolutionary Optolock® technology, licensed worldwide, has created the ability to bring fiber into every home in the world.

Firecomms is headquartered in Cork, Ireland and has facilities in Japan and the USA. Additional information about the company can be found on its web site at http://www.firecomms.com

NEW SMT dc switching regulator from V-Infinity Division of CUI INC

V-Infinity, a division of CUI Inc, announces the release of the V78XX-500-SMT series, a surface mount version of its 0.5 A V78XX-500 dc switching regulator. The V78XX-500-SMT offers efficiencies of up to 96% and is designed to be a high performance alternative to linear regulators. Unlike linear regulators, the V78XX-500-SMT series does not require a heat sink, making it ideal for applications where board space is at a premium and energy efficiency is a concern.

The V78XX-500-SMT series is compact, measuring 15.24 x 8.50 x 7.00 mm. A wide input range is available from 4.5 to 28 Vdc and regulated output voltages of 3.3, 5, 12, and 15 Vdc are offered. Output current is 500 mA with an operating temperature range of -40 to +71°C at 100% load, derating to 60% load at 85°C. The converters offer short circuit protection, thermal shutdown, very low ripple and noise (10 mV p-p typical), and an MTBF of 2 million hours. The V78XX-500-SMT series switching regulators are available now at Digi-Key.

Click here for complete specifications

Summary:

  1. Product name: V78XX-500-SMT series
  2. Availability: In Stock at Digi-Key
  3. Possible users: applications where board space is at a minimum
  4. Primary features:  96% efficient, no heat sink needed
  5. Cost:  pricing starts at $8.24 for 1 piece

For more information, contact your Electro Mark Sales Representative

Home | About Electro Mark | Whats New | Request Information | Visit EMI | Contact Us